-
TUV UL 1500VDC 10x85mm Solar DC Fuse 30A gPV Solar fuse holder in photovoltaic system
YRPV-30L 10x85mm DC fuse is suitable for solar photovoltaic power generation system, rated voltage to 1500VDC, rated current to 35A,connected with photovoltaic panels and batteries, to charge variable flow system for short circuit breaking protection in solar station and solar power generation system.The rated breaking capacity is 33KA,meeting the safety standard to IEC60269 . -
1500V MC4 fusible type Solar Fuse Connector with 10x85mm DC fuse 30A approved by TUV UL CE
1500V MC4 fusible type Solar Fuse Connector with 10x85mm DC fuse 30A works to protect the over-load current from solar panel and Inverter. 1500V Solar Fuse Connector is compatible with Multic Contact and other types MC4, and suitable to solar cable, 2.5mm, 4mm and 6mm. Advantage is the inline fuse can be replaced,quickly and reliable connection,UV resistance and IP68 waterproof,can be working outdoor for 25years. -
PV Tab Wire Bus Bar for DIY Soldering Solar Cells
The ribbon tab wire , bus bar and Flux pen are specially used for solar module production line. -
Automatic Solar PV Cable Wire Stripper Stripping Tool 2.5mm2 4mm2 6mm2
Automatic Solar PV Cable Wire Stripper Stripping Tool 1.5mm2 to 6mm2 is reliable stripping of the double layer insulated cables, particularly for solar cables (2.5- 6.0 mm²).Special design for strips and grips in one motion simultaneously and precisely through without damage.With adjustable length stop for accurate stripping length setting. -
PV Solar MC4 Tool Set kits Bag For MC4 Multifunction Including Crimping Tool Stripping Plier
PV Solar MC4 Tool Set kits Bag For MC4 Multifunction Including Crimping/Stripping Plier is delivered in a professional case that can be used in solar photovoltaic installations, it contains crimping tool,stripping tool,cutter,MC4 spanner,straight/cross screwdriver, for quick and easy assembly of MC4 contacts and solar cables from 2.5mm to 6mm size. -
MC4 Connector Spanner disconnect hand tool wrench fit for MC4 Solar DC Plug
Disconnect Tool MC4 Spanner Wrench Fit for MC4 Solar Connector is used to screw connector cap, it will be tight connection with solar cable -
Solar Power Surge Protection Device 60KA AC Surge Lighting Arrester SPD
Solar Power Surge Protection Device 60KA AC Surge Lighting Arrester SPD (in short AC SPD,alias,surge suppressor,surge arrester)is suitable for TN-S, TN-C-S, TT, IT etc, the power supply system of AC 50/60Hz,<380V. When the SPD fails in breakdown for over heat or over-current, the failure release will help electric equipments separate from the power supply system and give the indication signal, it also could be replaced for the module when has operating voltage in Solar PV Systems. -
2P 30mA 63A ELCB RCCB RCD Residual Current Circuit Breaker
RCB RCCB is Residual Current Circuit Breaker ,ELCB is Earth Leakage Circuit Breaker,which is applicable to electric circuits with rated voltage 230/400V AC, frequency 50/60Hz and rated current from 16Amp to 125Amp.
RCCB ELCB RCD provides indirect protection to the operator's body under such condition that the exposed live partsshould be connected to a proper earthing pole.RCCB also provides protection against the fire danger caused by earth fault current due to function failure of over-current protection device. -
AC Miniature Circuit Breaker 63 Amp 1P 2P 3P 4P AC MCB
AC Miniature Circuit Breaker 63 Amp 3 Phase MCB are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already protection or not required. Devices are designed for direct current (AC) control circuit applications in Solar Power Systems.